here is my p6 done by todd at [b][url]www.customizedcreationz.com[/url][/b].
[img]http://www.customizedcreationz.com/images/600_Dark_Earth_P6_Larry.jpg[/img]
this is a picture off his website. hopefully it worked its my first attempt at posting a picture.
i had him do
ccas melt job with a refinish in cerakote sig black and flat dark earth
stage 2 action job
meprolight night sights
one of his stainless steel guide rods
the finish on the gun is awesome. very easy to clean up. the action work is great and the gun is very accurate.
i have had him do several guns for me now and have several more that he is going to do.
if your going to have any refinishing work or custom work done to your gun todd is the man to do it. very professional, very knowledgeable and polite. couldnt ask for a better person or business to deal with then todd.
If anyone is thinking about getting this Todd is THE MAN to do it, looks great and he's going to be seeing my 9mm very shortly.
Thanks! -Sean
Click to Enlarge
I got the barrel today-looks good!
Karl H
Click to Enlarge
Hi Todd,
The barrell came in today--Looks beautiful! I took the P6 out to the range. HP's feed much, much better, but will still take some time to find the right combo. Thanks again for a great job.
Ron S.
Glock Barrel Polishing
Simply AMAZING!!!!!!!!!!! Wow!! Very Impressed! Thanks!!
I will be sending you more VERY SOON!
Todd T.
Hi Todd. Got my P220 guide rod today, looks and works perfect.
Thanks
Zack (Beerman)
Todd,
My P6 barrel you modified arrived today. Man, it is BEAUTIFUL. I'll probably be able to shoot some hollow points through it before the end of the week. I'll give you a report after I do.
Thanks again,
Tim
Todd
I received the guide rods in the mail today. They look great. You do excellent work.
Thanks
Steve
Polished XD .45acp Service Model Barrel and Guide Rod
That's amazing! Looks very professional, Im glad I sent it to you. Thanks
Allen H
Click to Enlarge
Todd
Chuck got the Officers' model and finally brought it for me to look at, LOOKS GREAT!!!
You did a fantastic job....
Thanks again for a great job, had a hard time inspecting it for slobberin' on it...
JR
Hi Todd,
Guide rod came yesterday. Looks and works great.
Thanks!
Marty
Click to Enlarge
Todd,
I got my package!!!!! Okay, 1st off HOLY SHIT!!!!!! Second off, UNBELIEVABLE!!!!! I can’t believe how well they turned out. Everything looks great, I will need to meet with you to drop off my Kahr to have the same treatment done. I’m kind of wondering though how the entire slide would look polished like the Glock you have on your website??? Anyway, I’ll be getting in touch with you to see when a good time to meet would be. Thanks so much for everything. I look forward to having more work done soon.
Terry
Thanks Todd, polish job looks great! I plan to do some more work with you in the future. Probably some bike polishing for my Suzuki VX800 & more gun parts. Do you do nickle @ all?
Scott S.
P6 Feed Ramp Machine to feed Hollow Points
Got it today Todd. Looks awesome...much improved over factory!
Seth
Click to Enlarge
Todd-
It came out sooooo nice. Very happy with it. I have a couple more parts I wanna send you. Will send details and ask about pricing soon. Here are some pics. Use them for your website if you wish. Thanks again!
-Nate
Your other rods, on P6/225, 220, 228 and 226 do a great job of reducing muzzle jump and getting me on target for a faster follow up shot.
Mark.
Todd, got my P6 barrel and guide rod today. They both look stunning. Man, that barrel is clean now!
Thanks Hunter
Click to Enlarge
Hey Todd,
I just opened my package from you, thanks for sending it priority.
As I unwrapped the parts, it hit me, my first thought...............
Holy shit.......................this is beautiful !!!!!!!
You did a fantastic job my friend.
And yes the guide rod looks a lot better than what I had done with it.
I never could have ended up with that finish on my own.
I'll take some pics, assemble the pistol, and take some more pics.
There will be a long and lengthy post on your work on xdtalk Sir.
Thank you...
James S.
Click to Enlarge
Todd
Everything looks awesome. Kinda bad when now I don't want to shoot the gun cause it looks so good...lol. Everything turned out great! I'll try to take some pics of the gun complete in a few days. Once I get to the range and feel it is 100% reliable, I'll then be sending in my Kahr PM9 for the same treatment.
Thanks,
Jim
Todd,
Great work!! Thanks you very much.
Michael m.
Todd,
I wanted to say thanks again for you work. The parts look fabulous, I recieved them today. I'm now debating sending in the rest of the parts. :)
Jeremy B
Todd,
P/u my package today. DAMN !!!! is all I can say. I will be sending you more barrels in the not so distant future!!!
Thanks
Chris
I just wanted to drop you a line about my Sig p6 barrel. I ve taken it to the range a couple of times now and it shoots flawlessly. Feeds hollow points perfectly. Thanks for the great work and outstanding customer service.
GB
Todd, I just got my Nickel P6 short trigger. Absolutely love it. I couldnt wait to get home to install it. It fit like a glove. Getting that trigger bar in is always a pain to install, but after I snapped that in place the rest went together perfect. The trigger is way better then the stock trigger in both the DA and SA modes. Fit and function are superb. Now I have to get my controls to you to have them nickel plated, maybe I ll send the slide in as well and have your do the cerakote on it like the one you have pictured.
Jason R.
Click to Enlarge
Customized !!!!
Got my short trigger in 2 days !! 2 days !! Man that was lightening fast. Thanks for the fast shipping. The trigger is in and functions as it should. The feedramp you machined last month works flawless. I have about 3 boxes of gold dots through it and not one issue. I put 50 rounds through it yesterday with the new trigger. Awesome , just awesome !!! My girlfriend really likes the P6 now, so I am going to buy her one. Any deals on a trigger and guide rod this time ? Hint hint
Thanks again for another A+ part
Brian W.
YOU R THE MAN !!! The guide rod and trigger work great. Big difference in how the gun feels. I can actually feel the guide rod weight up front. The trigger just looks great compared to the stock trigger , and function is good. Can you make a medium type trigger ? Maybe something that is a little bit between the stock trigger and this one ? Might be another great selling idea ?!
Kyle ( aka ezdoesit69 )
Just got my Mosquito guide rod. Nice job on the guide rod. Fit perfect and replaces my junk, bent factory rod.
Thanks for getting me up and running again.
Tom W
I just got my controls back and opened the box in my cubicle at work. "HOLY SHIT" and my fellow coworker comes over and says whats wrong ? I show him the parts and explain that now I have to send in my other two sets of controls !!!
Thanks Todd
Will
Todd,
Just wanted to let you know I received my P6 barrel and short trigger, and ripped open the package like a kid at Christmas. The feedramp looks great, hopefully I'll have a chance to try it out with HPs within a week. I used your new video to install the short trigger; after about 15 minutes, I was done. Thanks for the walkthrough (hand a little trouble getting the breachblock in, but just took a little patience). Much better reach and control in DA, and I am amazed just how far back the single action trigger is (barely looks like there's room for it to go back further and fire, but there is).
I am very impressed with yoru workmanship, as well as your turnaround time, fast shipping, and excellent communication. It's refreshing to communicate directly with the guy in charge. I'll let you know how the feedramp works out. Thanks again.
Austin K.
Todd I got my parts back from you today. They look amazing. I really like the way the matte came out. The slide and barrel just look great. Cant wait till I get my XD slide back so I can see how the matte barrel and guide rod go, but it should look awesome. Thanks again for the fast turn around time and great communication.
Jim B.
TODD, received the Sig. THANK YOU. As good as advertised. Beautiful piece. Keep up the good work. You have made an art out of a weapon. Reed
Todd,
Buddy all I can say is WOW. Thanks, got my project 220 in pictures are posted at:
http://s81.photobucket.com/albums/j204/tattooedbard/guns/
Will be posting your handy work on sig forum already posted it on XDtalk
Thanks again Jim C
Todd, I'm sorry it took so long to let you know how much I love the work you did on my P6. The barrel and insert are beautiful and the hammer bob was perfect! Definately considering getting a trigger or more work done now. Thanks again. I might try to send some pictures, too.
Holy Crap x 2!
First, I can't believe how these two Mini 14 mags look - WOW!
Second, the turn around time was completely unexpected. Just over a week with shipping.
This is how you grow and maintain a strong business. I'll be sending more your way.
WOW.
Chris T.
Todd, I read the CUSTOMIZED CREATIONZ TODDS A GOD on Sig Forum and thats what prompted me to send you a gun. You sure live up to the awesome customer service and quality of work everyone praises you for !! A two week turn around on a complete gun refinish totally unheard of. I had another gun done by XXX and it took 4 1/2 months ! I am very pleased with the craftmanship you instill in your work. I have several other guns that I will be shipping to you after the holidays.
Happy Holidays
Frank B.
Dear Sir, I appreciate the fast responses and the quality of your work on the forum was great. After tolerating my emails with numerous questions, I sent off my work. I couldn't be more pleased with the results you returned to me. This was above my expectations. You turned a nice shooting gun into the best gun I own both outside and inside. With your talent and quick turnaround I am sure you ll go far with your business. You ll definitely be seeing more of my work after the holidays.
R. H.
Todd,
I received my Glock slides today and I want to let you know that I am absolutely happy with your work and great service! You did a top-notch job and I'm very happy with your choice of font for the engraving. You turned my plain looking Glock into a treasured Army momentum. I took it to the range and it even shoots better ;@). I'll be showing off your work to my friends and will highly recommend you to all.
Thanks and Merry Christmas,
Glenn H.
Todd, I received the Laser Engraving back and all I can say is I am speechless. It looks so awesome and fine detail. Your a true master of the art. Everyone I talked to was right on the money with their description of your customer service and attention to detail. I really appreciate the work and already sent another slide out for your touch ! Look for another email with details.
R.S.
Dear Sir, I ve been watching your work on Sig Forum and after one of my fellow officers showed me the work you did on his gun , I was very impressed. With the quality of work you produce I expected a very long turn around time. But was amazed and delighted to receive my gun back from you in less then 3 weeks. The amount of craftsmanship you put into these guns is amazing, and the turn around time is phenominal. I have already sent another gun for your magic touch. You should recieve it soon. With this type of customer service, turn around and quality you instill, you are truely a class act. I wish you great success with your business.
Sincerly
Bill J.
*All pictures and videos are property of Todd McKechnie and Customized Creationz and can not be used without written permission. Todd McKechnie's Customized Creationz is a fully Licensed FFL Dealer / Gunsmith and holds Factory Armorer Certifications for several companies. Turn around times vary with work load, please email for turnaround quotes. We do not guarantee turn around times, as they are estimates to the best of our knowledge at that particular time. If you need a specific date please email or call Customized Creationz for a more accurate turn around time frame and if we can accommodate your needs. We are open by appointment only 10am to 5 pm eastern. We have no public walk in hours with out appointment. Warranty work must be returned to Customized Creationz with original invoice, for inspection. Outside work will void Customized Creationz warranty. All warranty work is against defect of workmanship only or from parts we produce that are deemed defective ( untouched / unmodified ). Modification to original work or parts will void warranty. No refunds on any service work, no refunds on parts , we will exchange parts for the same or upgraded part per our discretion. Todd McKechnie's Customized Creationz @ 2003
